YG-1 0.2500 in or 6.3500 mm Square Powder Metal Ticn 3 Flute End Mill

Size: 1/4 x 0.375 x 0.625 x 2.4375

Description

General

The Yg-1 Asp is a Standard length TICN coated square Powder Metal Finisher. It has a single end, and a weldon flat shank. This mill is capable of cutting Steel 20 – 40 HRc,CAST IRON For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use TiCN

TiCN is a great lubricity coating used in machining all kind of materials at lower temperatures. It excels in Brass, Bronze, plastic and Aluminum. It can be used in Steel, iron, Stainless and High Temp alloys at lower surface footage. This coating can be applied HSS, Cobalt, Powder Metal and Carbide. If you are getting built up edge and slowing down your cutter isnt a problem this is the coating to cure that problem.

Advatages to Powder Metal

Powder Metal falls between Carbiden and Cobalt on the hardness scale. Particals can can be up to 78HRc but average hardness is 73HRc. Powder metal come in many different blends and is used when carbide is fracturing and Cobalt is wearing from heat. This is a great alternative to carbide as it can be ground to very sharp edge do to its small partical density. It can take high load cutting at close to carbide surface footage. It excells in high temp alloy machining as with its ability to have sharp edge and toughness in high tensile strengh aplications. It is used many times in aplications wear machine tool cant acheive recomended surface footage for carbide.

Industries used in

Job Shop

Shipping

Ships From: ILLINOIS

Additional information

Flutes

3

Single/Double End

Single End

Brand

YG-1

Model

ASP

Material Cut Rating

CAST IRON, Steel 20 – 40 HRc

Ships From

ILLINOIS

Cutting Diameter (DC)

0.2500 in || 6.3500 mm

Shank Diameter

0.2500 in || 6.3500 mm

Length of Cut (LB)

0.6250 in || 15.8750 mm

Overall Length (LF)

2.4375 in || 61.9125 mm

End/Corner Shape

SQUARE

Shank Style

WELDON FLAT

Corner Radius

Sharp

Tool Length

STANDARD

Material

POWDER METAL

Cutter Style

Finisher

Helix Angle

45

INCH/METRIC

INCH

Industry

JOB SHOP

Center Cutting?

Yes

Coating

TiCN

Reviews

There are no reviews yet.

Be the first to review “YG-1 0.2500 in or 6.3500 mm Square Powder Metal Ticn 3 Flute End Mill”