YG-1 0.1250 in or 3.1750 mm Square Powder Metal Tialn 4 Flute End Mill

Size: 1/8 x 0.375 x 0.375 x 2.3125

Description

General

The Yg-1 Only One is a Standard length TiALN coated square Powder Metal Finisher. It has a single end, and a weldon flat shank. This mill is capable of cutting Steel 20 – 40 HRc,CAST IRON,STAINLESS For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use TiAlN

TiAlN is the most common coating used for machining Steel, Stainless, High Temp and Iron. This coating is good for high speed machining and is very stable in all cutting conditions. TiAlN takes rubbing better than some of its newer upgrades. This coating shows the most evident oxidization or black line behind cutting edge. This black area is a great indicator of proper use, the larger the black line the better your life will be. First choice coating for most machining.

Advatages to Powder Metal

Powder Metal falls between Carbiden and Cobalt on the hardness scale. Particals can can be up to 78HRc but average hardness is 73HRc. Powder metal come in many different blends and is used when carbide is fracturing and Cobalt is wearing from heat. This is a great alternative to carbide as it can be ground to very sharp edge do to its small partical density. It can take high load cutting at close to carbide surface footage. It excells in high temp alloy machining as with its ability to have sharp edge and toughness in high tensile strengh aplications. It is used many times in aplications wear machine tool cant acheive recomended surface footage for carbide.

When to use Variable Helix

Variable Helix is becoming the standard for all milling tools. It is used to dampen vibration as the flutes enter and exit the material. Depending on the type of variables these tools work great for long reach, slotting, and roughing. Down fall is variable tools like high helix tools can pull out of shrink fit, collets and milling chucks. Weldon flat when roughing is preferred and most failures are chipping from pulling out of work holding

Industries used in

Job Shop

Shipping

Ships From: ILLINOIS

Additional information

Flutes

4

Single/Double End

Single End

Brand

YG-1

Model

Only One

Material Cut Rating

CAST IRON, STAINLESS, Steel 20 – 40 HRc

Ships From

ILLINOIS

Cutting Diameter (DC)

0.1250 in || 3.1750 mm

Shank Diameter

0.1250 in || 3.175 mm

Length of Cut (LB)

0.3750 in || 9.5250 mm

Overall Length (LF)

2.3125 in || 58.7375 mm

End/Corner Shape

SQUARE

Shank Style

WELDON FLAT

Corner Radius

Sharp

Tool Length

STANDARD

Material

POWDER METAL

Cutter Style

Finisher

Helix Angle

VARIABLE

INCH/METRIC

INCH

Industry

JOB SHOP

Center Cutting?

Yes

Coating

TiAlN

Reviews

There are no reviews yet.

Be the first to review “YG-1 0.1250 in or 3.1750 mm Square Powder Metal Tialn 4 Flute End Mill”