YG-1 0.1250 in or 3.1750 mm Square Cobalt Uncoated 4 Flute End Mill

Size: 1/8 x 0.1875 x 0.1875 x 2.000

Description

General

The Yg-1 Genral Purpose is a Stub length UNCOATED coated square Cobalt Miniature. It has a double end, and a weldon flat shank. This mill is capable of cutting Steel 20 – 40 HRc,IRON,STAINLESS For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Advantages to Cobalt

Cobalt is extremly versitile and is used on matirials up to 40HRc as it is 68HRc making it the second toughest substrate. Cobalt can be used on almost all matirials. It should be used when carbide chips or when High Speed wears out quickly. Cobalt performs extremly well on high tensile strength matirials, wear high cutting forces fracture carbide.

Industries used in

Job Shop,Mold/Die,Medical

Shipping

Ships From: ILLINOIS

Additional information

Flutes

4

Single/Double End

Double End

Brand

YG-1

Model

Genral Purpose

Material Cut Rating

IRON, STAINLESS, Steel 20 – 40 HRc

Ships From

ILLINOIS

Cutting Diameter (DC)

0.1250 in || 3.1750 mm

Shank Diameter

0.1250 in || 3.175 mm

Length of Cut (LB)

0.1875 in || 4.7625 mm

Overall Length (LF)

2.0000 in || 50.8000 mm

End/Corner Shape

SQUARE

Shank Style

WELDON FLAT

Corner Radius

Sharp

Tool Length

STUB

Material

Cobalt

Cutter Style

Miniature

Helix Angle

30

INCH/METRIC

INCH

Industry

JOB SHOP, MEDICAL, MOLD/DIE

Coating

Uncoated

Reviews

There are no reviews yet.

Be the first to review “YG-1 0.1250 in or 3.1750 mm Square Cobalt Uncoated 4 Flute End Mill”