YG-1 0.0787 in or 2.0000 mm Square Cobalt Uncoated 6 Flute End Mill

Size: 2.00MM x 2.000MM x 8 x 11.75

Description

General

The Yg-1 Sine-Power End Mills is a Standard length UNCOATED coated square Cobalt Finisher. It has a single end, and a weldon flat shank. This mill is capable of cutting TITANIUM,HIGH TEMP For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Advantages to Cobalt

Cobalt is extremly versitile and is used on matirials up to 40HRc as it is 68HRc making it the second toughest substrate. Cobalt can be used on almost all matirials. It should be used when carbide chips or when High Speed wears out quickly. Cobalt performs extremly well on high tensile strength matirials, wear high cutting forces fracture carbide.

Industries used in

Job Shop,Aerospace,Medical

Shipping

Ships From: ILLINOIS

Additional information

Flutes

6

Single/Double End

Single End

Brand

YG-1

Model

Sine-Power End Mills

Material Cut Rating

HIGH TEMP, TITANIUM

Ships From

ILLINOIS

Cutting Diameter (DC)

0.0787 in || 2.0000 mm

Shank Diameter

0.0031 in || 0.0787 mm

Length of Cut (LB)

0.3150 in || 8.0000 mm

Overall Length (LF)

0.4626 in || 11.7500 mm

End/Corner Shape

SQUARE

Shank Style

WELDON FLAT

Corner Radius

Sharp

Tool Length

STANDARD

Material

Cobalt

Cutter Style

Finisher

Helix Angle

30

INCH/METRIC

METRIC

Industry

AEROSPACE, JOB SHOP, MEDICAL

Center Cutting?

Yes

Coating

Uncoated

Reviews

There are no reviews yet.

Be the first to review “YG-1 0.0787 in or 2.0000 mm Square Cobalt Uncoated 6 Flute End Mill”