Swiftcarb 0.3750 in or 9.5250 mm Corner Radius Carbide Uncoated 2 Flute End Mill

Size: 0.375 x 0.375 x 0.5 x 3.5O

SKU: AC037528IFK7R600 Categories: , ,

Description

General

The Swiftcarb Swift Carb is a Standard length UNCOATED coated corner radius Carbide Bull Nose Finisher . It has a single end, and a round shank. This mill is capable of cutting ALUMINUM,PLASTIC For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

When to use Variable Helix

Variable Helix is becoming the standard for all milling tools. It is used to dampen vibration as the flutes enter and exit the material. Depending on the type of variables these tools work great for long reach, slotting, and roughing. Down fall is variable tools like high helix tools can pull out of shrink fit, collets and milling chucks. Weldon flat when roughing is preferred and most failures are chipping from pulling out of work holding

Industries used in

Job Shop,Energy Mfg,Mold/Die,Aerospace,Medical

Shipping

Ships From: WASHINGTON

Additional information

Flutes

2

Single/Double End

Single End

USA Made

Yes

Brand

SwiftCarb

Model

SWIFT CARB

Material Cut Rating

ALUMINUM, PLASTIC

Ships From

WASHINGTON

Cutting Diameter (DC)

0.3750 in || 9.5250 mm

Shank Diameter

0.3750 in || 9.5250 mm

Length of Cut (LB)

0.5000 in || 12.7000 mm

Overall Length (LF)

3.5000 in || 88.9000 mm

End/Corner Shape

Corner Radius

Shank Style

Round

Corner Radius

0.0300 in || 0.7620 mm

Tool Length

STANDARD

Length of Relief

2.0000 in || 50.8000 mm

Material

Carbide

Cutter Style

Bull Nose Finisher

Helix Angle

VARIABLE

INCH/METRIC

INCH

Industry

AEROSPACE, ENERGY MFG, JOB SHOP, MEDICAL, MOLD/DIE

Center Cutting?

Yes

Coating

Uncoated

Reviews

There are no reviews yet.

Be the first to review “Swiftcarb 0.3750 in or 9.5250 mm Corner Radius Carbide Uncoated 2 Flute End Mill”