Melin 1.2500 in or 31.7500 mm Corner Radius Cobalt Nacroa 6 Flute End Mill

Size: 1-1/4 x 1-1/4 x 6 x 8.5

Description

General

The Melin Melin is a Standard length nACRoA coated corner radius Cobalt Wave Cut Rougher. It has a single end, and a weldon flat shank. This mill is capable of cutting Steel 20 – 40 HRc,STAINLESS,CAST IRON,HIGH TEMP For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use nACRoA

nACRoA is applicable to HSS and carbide tooling and for forming and forging operations. nACRoA has shown great results in machining a wide variety of hardened steels up to 54 HRC both with and without coolant as well as low alloy steels and high tensile steels. nACRoA has best success at high cutting speeds. If you cant achieve high cutting speeds the coat will wear off quickly and you should revert to TiCN or TiN. I would use nACRoA as the first choice in High Temp Alloy, soft steel that can be run at very high surface foot, Stainless and hardened steel. At proper use or heat you will see a thin black line that is the oxidation process, the darker the line the closer you are to ideal use.

Advantages to Cobalt

Cobalt is extremly versitile and is used on matirials up to 40HRc as it is 68HRc making it the second toughest substrate. Cobalt can be used on almost all matirials. It should be used when carbide chips or when High Speed wears out quickly. Cobalt performs extremly well on high tensile strength matirials, wear high cutting forces fracture carbide.

Industries used in

Job Shop,Aerospace,Medical

Shipping

Ships From: OHIO/CALIFORNIA

Additional information

Flutes

6

Single/Double End

Single End

USA Made

Yes

Brand

Melin

Model

MELIN

Material Cut Rating

CAST IRON, HIGH TEMP, STAINLESS, Steel 20 – 40 HRc

Ships From

OHIO/CALIFORNIA

Cutting Diameter (DC)

1.2500 in || 31.7500 mm

Shank Diameter

1.2500 in || 31.7500 mm

Length of Cut (LB)

6.0000 in || 152.4000 mm

Overall Length (LF)

8.5000 in || 215.9000 mm

End/Corner Shape

Corner Radius

Shank Style

WELDON FLAT

Corner Radius

0.2500 in || 6.3500 mm

Tool Length

STANDARD

Material

Cobalt

Cutter Style

WAVE CUT ROUGHER

Helix Angle

35

INCH/METRIC

INCH

Industry

AEROSPACE, JOB SHOP, MEDICAL

Center Cutting?

Yes

Coating

nACRoA

Reviews

There are no reviews yet.

Be the first to review “Melin 1.2500 in or 31.7500 mm Corner Radius Cobalt Nacroa 6 Flute End Mill”