HTC 0.1250 in or 3.1750 mm Ball Nose Carbide Uncoated 4 Flute End Mill

Size: 1/8 X 3/8 X 3/8 X 3-1/16

SKU: 215-4125 Categories: , , ,

Description

General

The Htc Htc is a Standard length UNCOATED coated ball nose Carbide Ball Finisher. It has a double end, and a weldon flat shank. This mill is capable of cutting Steel 20 – 40 HRc,CAST IRON,STAINLESS For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

Industries used in

Job Shop

Shipping

Ships From: MICHIGAN

Additional information

Flutes

4

Single/Double End

Double End

USA Made

Yes

Brand

HTC

Model

HTC

Material Cut Rating

CAST IRON, STAINLESS, Steel 20 – 40 HRc

Ships From

MICHIGAN

Cutting Diameter (DC)

0.1250 in || 3.1750 mm

Shank Diameter

0.1250 in || 3.175 mm

Length of Cut (LB)

0.3750 in || 9.5250 mm

Overall Length (LF)

3.0625 in || 77.7875 mm

End/Corner Shape

Ball Nose

Shank Style

WELDON FLAT

Corner Radius

BALL 180

Tool Length

STANDARD

Material

Carbide

Cutter Style

Ball Finisher

Helix Angle

30

INCH/METRIC

INCH

Industry

JOB SHOP

Center Cutting?

Yes

Coating

Uncoated

Reviews

There are no reviews yet.

Be the first to review “HTC 0.1250 in or 3.1750 mm Ball Nose Carbide Uncoated 4 Flute End Mill”