Harvey Tool 0.1250 in or 3.1750 mm Drill Point Cobalt Uncoated 2 Flute End Mill

Description

General

The Harvey Tool Harvey is a Standard length UNCOATED coated drill point Cobalt Drill/Mill . It has a single end, and a round shank. This mill is capable of cutting Steel 41 – 50 HRc,IRON,STAINLESS For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Advantages to Cobalt

Cobalt is extremly versitile and is used on matirials up to 40HRc as it is 68HRc making it the second toughest substrate. Cobalt can be used on almost all matirials. It should be used when carbide chips or when High Speed wears out quickly. Cobalt performs extremly well on high tensile strength matirials, wear high cutting forces fracture carbide.

Industries used in

Shipping

Ships From: MASSACHUSETTS

Additional information

Flutes

2

Single/Double End

Single End

USA Made

Yes

Brand

Harvey Tool

Model

HARVEY

Material Cut Rating

IRON, STAINLESS, Steel 41 – 50 HRc

Ships From

MASSACHUSETTS

Cutting Diameter (DC)

0.1250 in || 3.1750 mm

Shank Diameter

0.1250 in || 3.175 mm

End/Corner Shape

DRILL POINT

Shank Style

Round

Tool Length

STANDARD

Material

Cobalt

Cutter Style

Drill/Mill

INCH/METRIC

INCH

Coating

Uncoated

Coolant Through

NO

Taper Flute

NO

Chamfer Angle

90

Reviews

There are no reviews yet.

Be the first to review “Harvey Tool 0.1250 in or 3.1750 mm Drill Point Cobalt Uncoated 2 Flute End Mill”