Emuge 0.1969 in or 5.0000 mm Corner Radius Carbide Glt 3 Flute End Mill

Size: 5.00MM x 6.000MM x 10.000MM x 57.00MM

Description

General

The Emuge Alu-Cut is a Standard length GLT coated corner radius Carbide Rougher. It has a single end, and a round shank. This mill is capable of cutting ALUMINUM,PLASTIC For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use GLT-1

GLT-1 coating – Hard surface coating with anti-friction layer. The combination of a hard surface coating with an anti-friction layer provides maximum tool life. Chip flow is also improved due to increased lubricity.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

When to use Variable Helix

Variable Helix is becoming the standard for all milling tools. It is used to dampen vibration as the flutes enter and exit the material. Depending on the type of variables these tools work great for long reach, slotting, and roughing. Down fall is variable tools like high helix tools can pull out of shrink fit, collets and milling chucks. Weldon flat when roughing is preferred and most failures are chipping from pulling out of work holding

Industries used in

Job Shop

Shipping

Ships From: MASSACHUSETTS

Additional information

Flutes

3

Single/Double End

Single End

Brand

Emuge

Model

Alu-Cut

Material Cut Rating

ALUMINUM, PLASTIC

Ships From

MASSACHUSETTS

Cutting Diameter (DC)

0.1969 in || 5.0000 mm

Shank Diameter

0.0077 in || 0.1968 mm

Length of Cut (LB)

0.3937 in || 10.0000 mm

Overall Length (LF)

2.2441 in || 57.0000 mm

End/Corner Shape

Corner Radius

Shank Style

Round

Tool Length

STANDARD

Length of Relief

0.7480 in || 19.0000 mm

Material

Carbide

Cutter Style

Rougher

Helix Angle

VARIABLE

INCH/METRIC

METRIC

Industry

JOB SHOP

Center Cutting?

Yes

Coating

GLT

Reviews

There are no reviews yet.

Be the first to review “Emuge 0.1969 in or 5.0000 mm Corner Radius Carbide Glt 3 Flute End Mill”