Emuge 0.1181 in or 3.0000 mm Corner Radius Carbide Uncoated 2 Flute End Mill

Size: 3.00MM x 8.000MM x 6.000MM x 63.00MM

SKU: 3445.03003A Categories: , , ,

Description

General

The Emuge Turbine Program is a Standard length UNCOATED coated corner radius Carbide Ball Taper Flute Finisher . It has a single end, and a round shank. This mill is capable of cutting Steel 51+ HRc,CAST,STAINLESS,TITANIUM,HIGH TEMP For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

Industries used in

Job Shop,Energy Mfg,Mold/Die,Automotive,Aerospace,Agriculture,Medical

Shipping

Ships From: MASSACHUSETTS

Additional information

Flutes

2

Single/Double End

Single End

Brand

Emuge

Model

Turbine Program

Material Cut Rating

CAST, HIGH TEMP, STAINLESS, Steel 51+ HRc, TITANIUM

Ships From

MASSACHUSETTS

Cutting Diameter (DC)

0.1181 in || 3.0000 mm

Shank Diameter

0.0046 in || 0.1181 mm

Length of Cut (LB)

0.2362 in || 6.0000 mm

Overall Length (LF)

2.4803 in || 63.0000 mm

End/Corner Shape

Corner Radius

Shank Style

Round

Corner Radius

0.0118 in || 0.2997 mm

Tool Length

STANDARD

Material

Carbide

Cutter Style

Ball Taper Flute Finisher

Helix Angle

30

INCH/METRIC

METRIC

Industry

AEROSPACE, AGRICULTURE, AUTOMOTIVE, ENERGY MFG, JOB SHOP, MEDICAL, MOLD/DIE

Center Cutting?

Yes

Coating

Uncoated

Taper Flute

YES

Taper Angle

3

Reviews

There are no reviews yet.

Be the first to review “Emuge 0.1181 in or 3.0000 mm Corner Radius Carbide Uncoated 2 Flute End Mill”