Emuge 0.1181 in or 3.0000 mm Ball Nose Carbide Diamond 2 Flute End Mill

Size: 3.00MM x 6.000MM x 10.000MM x 47.00MM

SKU: 2623E.300616 Categories: , , ,

Description

General

The Emuge Dental Mills is a Standard length DIAMOND coated ball nose Carbide Dental. It has a single end, and a round shank. This mill is capable of cutting Dental Mills For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use Diamond

Amorphous Diamond coatings are ideal for high abrasion resistance. This coating works well in graphite, carbon fiber and high silicone aluminum. The couple down falls to Diamond coatings are the material it can be grown on C2 carbide only, the thickness tends to create a duller edge, and the cost. Benefits if run properly and application is selected rite you can achieve 10-20 times life of many other coatings.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

When to use Variable Helix

Variable Helix is becoming the standard for all milling tools. It is used to dampen vibration as the flutes enter and exit the material. Depending on the type of variables these tools work great for long reach, slotting, and roughing. Down fall is variable tools like high helix tools can pull out of shrink fit, collets and milling chucks. Weldon flat when roughing is preferred and most failures are chipping from pulling out of work holding

Industries used in

Job Shop,Dental

Shipping

Ships From: MASSACHUSETTS

Additional information

Flutes

2

Single/Double End

Single End

Brand

Emuge

Model

Dental Mills

Material Cut Rating

Dental Mills

Ships From

MASSACHUSETTS

Cutting Diameter (DC)

0.1181 in || 3.0000 mm

Shank Diameter

0.0046 in || 0.1181 mm

Length of Cut (LB)

0.3937 in || 10.0000 mm

Overall Length (LF)

1.8504 in || 47.0000 mm

End/Corner Shape

Ball Nose

Shank Style

Round

Corner Radius

BALL 180

Tool Length

STANDARD

Material

Carbide

Cutter Style

Dental

Helix Angle

VARIABLE

INCH/METRIC

METRIC

Industry

DENTAL, JOB SHOP

Center Cutting?

Yes

Coating

Diamond

Reviews

There are no reviews yet.

Be the first to review “Emuge 0.1181 in or 3.0000 mm Ball Nose Carbide Diamond 2 Flute End Mill”