Award 0.6250 in or 15.8750 mm Square Cobalt Uncoated 3 Flute End Mill

Size: 5/8 TIP x 3/4 SHK x 4 1/4 FL x 6 1/2 OAL

SKU: KX-1017-CO Categories: , , ,

Description

General

This Award end mill is a Standard length UNCOATED coated square Cobalt Taper Flute Finisher. It has a single end, and a round shank. This mill is capable of cutting Steel 20 – 40 HRc,IROLUMINIUM,STAINLES,HIGH TEMP For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Advantages to Cobalt

Cobalt is extremly versitile and is used on matirials up to 40HRc as it is 68HRc making it the second toughest substrate. Cobalt can be used on almost all matirials. It should be used when carbide chips or when High Speed wears out quickly. Cobalt performs extremly well on high tensile strength matirials, wear high cutting forces fracture carbide.

Industries used in

Job Shop,Energy Mfg,Mold/Die,Automotive,Aerospace,Agriculture

Shipping

Ships From: MICHIGAN

Additional information

Flutes

3

Single/Double End

Single End

USA Made

Yes

Brand

Award

Model

AWARD

Material Cut Rating

HIGH TEMP, IROLUMINIUM, STAINLES, Steel 20 – 40 HRc

Ships From

MICHIGAN

Cutting Diameter (DC)

0.6250 in || 15.8750 mm

Shank Diameter

0.6250 in || 15.8750 mm

Length of Cut (LB)

4.2500 in || 107.9500 mm

Overall Length (LF)

6.5000 in || 165.1000 mm

End/Corner Shape

SQUARE

Shank Style

Round

Corner Radius

Sharp

Tool Length

STANDARD

Material

Cobalt

Cutter Style

Taper Flute Finisher

Helix Angle

30

INCH/METRIC

INCH

Industry

AEROSPACE, AGRICULTURE, AUTOMOTIVE, ENERGY MFG, JOB SHOP, MOLD/DIE

Coating

Uncoated

Large Diameter

0.84753

Coolant Through

NO

Taper Flute

YES

Taper Angle

1.5

Reviews

There are no reviews yet.

Be the first to review “Award 0.6250 in or 15.8750 mm Square Cobalt Uncoated 3 Flute End Mill”