Award 0.0468 in or 1.1887 mm Ball Nose Carbide Uncoated 3 Flute End Mill

Size: 3/64 BALL x 3/16 SHK x 1/2 FL x 2 OAL

SKU: BM5-0502-CB Categories: , , ,

Description

General

This Award end mill is a Standard length UNCOATED coated ball nose Carbide Taper Flute Finisher. It has a single end, and a round shank. This mill is capable of cutting Steel 41 – 50 HRc,IROLUMINIUM,STAINLES,HIGH TEMP For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

Industries used in

Job Shop,Energy Mfg,Mold/Die,Automotive,Aerospace,Agriculture

Shipping

Ships From: MICHIGAN

Additional information

Flutes

3

Single/Double End

Single End

USA Made

Yes

Brand

Award

Model

AWARD

Material Cut Rating

HIGH TEMP, IROLUMINIUM, STAINLES, Steel 41 – 50 HRc

Ships From

MICHIGAN

Cutting Diameter (DC)

0.0468 in || 1.1887 mm

Shank Diameter

0.0468 in || 1.1887 mm

Length of Cut (LB)

0.5000 in || 12.7000 mm

Overall Length (LF)

2.0000 in || 50.8000 mm

End/Corner Shape

Ball Nose

Shank Style

Round

Corner Radius

BALL 180

Tool Length

STANDARD

Material

Carbide

Cutter Style

Taper Flute Finisher

Helix Angle

30

INCH/METRIC

INCH

Industry

AEROSPACE, AGRICULTURE, AUTOMOTIVE, ENERGY MFG, JOB SHOP, MOLD/DIE

Coating

Uncoated

Large Diameter

0.13437

Coolant Through

NO

Taper Flute

YES

Taper Angle

5

Reviews

There are no reviews yet.

Be the first to review “Award 0.0468 in or 1.1887 mm Ball Nose Carbide Uncoated 3 Flute End Mill”