YG-1 0.1250 in or 3.1750 mm Ball Nose Powder Metal Uncoated 2 Flute End Mill

Size: 1/8 x 0.375 x 0.375 x 2.3125

Description

General

The Yg-1 Tank-Power End Mill is a Standard length UNCOATED coated ball nose Powder Metal Ball Finisher. It has a single end, and a weldon flat shank. This mill is capable of cutting Steel 20 – 40 HRc,STAINLESS,CAST IRON,HIGH TEMP For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Advatages to Powder Metal

Powder Metal falls between Carbiden and Cobalt on the hardness scale. Particals can can be up to 78HRc but average hardness is 73HRc. Powder metal come in many different blends and is used when carbide is fracturing and Cobalt is wearing from heat. This is a great alternative to carbide as it can be ground to very sharp edge do to its small partical density. It can take high load cutting at close to carbide surface footage. It excells in high temp alloy machining as with its ability to have sharp edge and toughness in high tensile strengh aplications. It is used many times in aplications wear machine tool cant acheive recomended surface footage for carbide.

Industries used in

Job Shop

Shipping

Ships From: ILLINOIS

Additional information

Flutes

2

Single/Double End

Single End

Brand

YG-1

Model

Tank-Power End Mill

Material Cut Rating

CAST IRON, HIGH TEMP, STAINLESS, Steel 20 – 40 HRc

Ships From

ILLINOIS

Cutting Diameter (DC)

0.1250 in || 3.1750 mm

Shank Diameter

0.1250 in || 3.175 mm

Length of Cut (LB)

0.3750 in || 9.5250 mm

Overall Length (LF)

2.3125 in || 58.7375 mm

End/Corner Shape

Ball Nose

Shank Style

WELDON FLAT

Corner Radius

BALL 180

Tool Length

STANDARD

Material

POWDER METAL

Cutter Style

Ball Finisher

Helix Angle

30

INCH/METRIC

INCH

Industry

JOB SHOP

Center Cutting?

Yes

Coating

Uncoated

Reviews

There are no reviews yet.

Be the first to review “YG-1 0.1250 in or 3.1750 mm Ball Nose Powder Metal Uncoated 2 Flute End Mill”