Not finding what you are looking for?

Speed up the selection process with some help from our great staff! This service is available anytime, 8a-4p M-F

Imco 0.1250 in or 3.1750 mm Corner Radius Carbide Altin 4 Flute End Mill

$27.39

Size: 1/8 x 1/8 x 1/2 x 1-1/2 AlTiNX

Description

General

The Imco Pow-R-Feed Mill is a Standard length AlTIN coated corner radius Carbide Bull Nose Finisher . It has a single end, and a round shank. This mill is capable of cutting Steel 20 – 40 HRc,STAINLESS,INCONEL,TITANIUM,HIGH TEMP For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use AlTIN

AlTIN is applicable to HSS and carbide tooling. AlTIN has shown great results in machining a wide variety material from General Steel, Iron, Stainless, High Temp and Hardened Steel with and without coolant. AlTIN is a great choice for general machining at elevated surface foot. The flank of the cutting edge should form a dark black line. The thicker the line the closer you are to achieving proper cutting parameters. This line is the oxidization process being finished as heat is generated. To thin a line or no black line means you are not generating enough heat that could cause coating to rub off.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

When to use Variable Helix

Variable Helix is becoming the standard for all milling tools. It is used to dampen vibration as the flutes enter and exit the material. Depending on the type of variables these tools work great for long reach, slotting, and roughing. Down fall is variable tools like high helix tools can pull out of shrink fit, collets and milling chucks. Weldon flat when roughing is preferred and most failures are chipping from pulling out of work holding

Industries used in

Job Shop,Energy Mfg,Mold/Die,Automotive,Aerospace,Agriculture,Medical

Shipping

Ships From: OHIO

Additional information

Flutes

4

Single/Double End

Single End

USA Made

Yes

Brand

IMCO

Model

Pow-R-Feed Mill

Material Cut Rating

HIGH TEMP, INCONEL, STAINLESS, Steel 20 – 40 HRc, TITANIUM

Ships From

OHIO

Cutting Diameter (DC)

0.1250 in || 3.1750 mm

Shank Diameter (DCON)

0.1250 in || 3.175 mm

Length of Cut (LB)

0.5000 in || 12.7000 mm

Overall Length (LF)

1.5000 in || 38.1000 mm

End/Corner Shape

Corner Radius

Shank Style

Round

Corner Radius (RE)

0.0150 in || 0.3810 mm

Tool Length

STANDARD

Material

Carbide

Cutter Style

Bull Nose Finisher

Helix Angle

VARIABLE

INCH/METRIC

INCH

Industry

AEROSPACE, AGRICULTURE, AUTOMOTIVE, ENERGY MFG, JOB SHOP, MEDICAL, MOLD/DIE

Center Cutting?

Yes

Coating

AlTiN

Reviews

There are no reviews yet.

Be the first to review “Imco 0.1250 in or 3.1750 mm Corner Radius Carbide Altin 4 Flute End Mill”

Your email address will not be published. Required fields are marked *