Emuge 0.0118 in or 0.3000 mm Corner Radius Cbn Uncoated 2 Flute End Mill

Size: 0.30MM x 4.000MM x 0.300MM x 50.00MM

Description

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Why CBN

CBN is the hardest material available. It is used to cut hardened steel, iron, and some high temp alloys. CBN can cut materials up to 75HRc at elevated surface foot. Solid CBN should not be used in materials less than 58HRc as cobalt leaching will occur. The tell-tale sign that CBN is too soft for the material you are cutting is pitting at depth of cut. This can not be fixed by running faster or generating more heat it is a chemical issue that occurs between softer material and CBN.

Industries used in

Additional information

Flutes

2

Single/Double End

Single End

Brand

Emuge

Model

Micro

Material Cut Rating

HARDENED STEEL 45-51+ HRc

Ships From

MASSACHUSETTS

Shank Diameter

0.0005 in || 0.0118 mm

Length of Cut (LB)

0.0118 in || 0.3000 mm

Overall Length (LF)

1.9685 in || 50.0000 mm

End/Corner Shape

Corner Radius

Shank Style

Round

Corner Radius

0.0059 in || 0.1499 mm

Tool Length

STANDARD

Length of Relief

0.0531 in || 1.3500 mm

Material

CBN

Cutter Style

CBN Ball

Helix Angle

0

INCH/METRIC

METRIC

Industry

AEROSPACE, JOB SHOP, MOLD/DIE

Center Cutting?

Yes

Coating

Uncoated

Reviews

There are no reviews yet.

Be the first to review “Emuge 0.0118 in or 0.3000 mm Corner Radius Cbn Uncoated 2 Flute End Mill”