Threading
Showing 1–50 of 532 results
-
Micro 100 ITL-3201000X LH Single Point UN Threading Tool – AlTiN, 10-32 TPI, 1.00 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITL-2901000X LH Single Point UN Threading Tool – AlTiN, 14-40 TPI, 1.00 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITM-064613 RH Single Point Shank Threading Tool, 0.70-1.50 mm Pitch, 13.00 mm MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITL-120600 LH Single Point UN Threading Tool, 32-56 TPI, 0.60 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-200600 QC Single Point UN Threading Tool, 16-40 TPI, 0.60 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-100350X QC Single Point UN Threading Tool – AlTiN, 32-64 TPI, 0.35 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITM-085815 RH Single Point Shank Threading Tool, 1.20-2.0 mm Pitch, 15.00 mm MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-160400 RH Single Point UN Threading Tool, 24-56 TPI, 0.40 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-2901750 QC Single Point UN Threading Tool, 12-40 TPI, 1.75 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-140400X RH Single Point UN Threading Tool – AlTiN, 28-56 TPI, 0.40 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 LTR-375-20 Thread Relief Tool, 0.375 in HW, 1.25 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITL-060250X LH Single Point UN Threading Tool – AlTiN, 48-76 TPI, 0.25 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-3601800X RH Single Point UN Threading Tool -AlTiN, 10-32 TPI, 1.80 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-110400X QC Single Point UN Threading Tool – ALTiN, 32-64 TPI, 0.40 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITL-100350X LH Single Point UN Threading Tool – AlTiN, 32-76 TPI, 0.35 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-2301000X RH Single Point UN Threading Tool – AlTiN, 20-40 TPI, 1.00 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 SAT-500-14X Stub ACME Threading Tool – AlTiN, 14 TPI, 0.50 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITL-320750 LH Single Point UN Threading Tool, 10-32 TPI, 0.75 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-160400 QC Single Point UN Threading Tool, 20-56 TPI, 0.40 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-320500 RH Single Point UN Threading Tool, 10-32 TPI, 0.50 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-140400 QC Single Point UN Threading Tool, 20-56 TPI, 0.40 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-140250 QC Single Point UN Threading Tool, 20-56 TPI, 0.25 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 IAT-2000-5 ACME Threading Tool, 0.512 in MinBD, 2.00 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITL-2301000 LH Single Point UN Threading Tool, 20-40 TPI, 1.00 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-060200X RH Single Point UN Threading Tool – AlTiN, 48-76 TPI, 0.20 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-320500X RH Single Point UN Threading Tool – AlTiN, 10-32 TPI, 0.50 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-2901000X RH Single Point UN Threading Tool – AlTiN, 14-40 TPI, 1.00 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-100600X RH Single Point UN Threading Tool – AlTiN, 32-76 TPI, 0.60 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-120400 RH Single Point UN Threading Tool, 32-56 TPI, 0.40 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITL-360750X LH Single Point UN Threading Tool – AlTiN, 10-32 TPI, 0.75 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITL-180500 LH Single Point UN Threading Tool, 24-56 TPI, 0.50 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-4902000 RH Single Point UN Threading Tool, 6-24 TPI, 2.00 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITL-320750X LH Single Point UN Threading Tool – AlTiN, 10-32 TPI, 0.75 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-120400X RH Single Point UN Threading Tool – AlTiN, 32-56 TPI, 0.40 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-460750 QC Single Point UN Threading Tool, 6-24 TPI, 0.75 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITL-120500 LH Single Point UN Threading Tool, 32-56 TPI, 0.50 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-050150X RH Single Point UN Threading Tool – AlTiN, 48-76 TPI, 0.15 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-1601000 QC Single Point UN Threading Tool, 20-56 TPI, 1.00 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-080250X QC Single Point UN Threading Tool – AlTiN, 32-76 TPI, 0.25 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-180750 RH Single Point UN Threading Tool, 24-56 TPI, 0.75 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITL-490750X LH Single Point UN Threading Tool – AlTiN, 6-24 TPI, 0.75 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 IT-120250X RH Single Point UN Threading Tool – AlTiN, 32-56 TPI, 0.25 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 ITM-085825X RH Single Point Shank Threading Tool – AlTiN, 1.20-2.00 mm Pitch, 25.00 mm MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-120500X QC Single Point UN Threading Tool – AlTiN, 24-56 TPI, 0.50 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 IAT-1000-14 ACME Threading Tool, 0.277 in MinBD, 1.00 in MaxBD
SOLID TURNING GROOVING THREADING
-
Micro 100 SAT-2000-8X Stub ACME Threading Tool – AlTiN, 8 TPI, 2.00 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-140750X QC Single Point UN Threading Tool – AlTiN, 20-56 TPI, 0.75 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 SAT-2000-8 Stub ACME Threading Tool, 8 TPI, 2.00 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-040100 QC Mini-Single Point UN Threading Tool, 56-80 TPI, 0.10 in Max BD
SOLID TURNING GROOVING THREADING
-
Micro 100 QIT-110250 QC Single Point UN Threading Tool, 32-64 TPI, 0.25 in Max BD
SOLID TURNING GROOVING THREADING