General Drills
Showing 3901–3950 of 11904 results
-
YG-1 11.6 mm Dia. 140 Carbide TiAlN 5XD Non-Coolant Thru Drill
11.60MM CARBIDE DREAM DRILL (5XD) – METRIC
-
-
YG-1 8.1 mm Dia. 140 Carbide TiAlN 3XD Non-Coolant Thru Drill
8.10MM CARBIDE DREAM DRILL (3XD) – METRIC
-
-
-
YG-1 5.05 mm Dia. 118 Carbide Bright Jobber Non-Coolant Thru Drill
5.05MM CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
STI 9.4 mm Dia. 130 TiAlN Carbide 5-8XD Non-Coolant Thru Drill
9.40 MM DIA 3 FLUTE NON COOLANT TIALN
-
-
-
-
-
-
-
-
-
-
-
HAM 12 mm Dia. 140 TA-C Non-Coolant Thru Drill
12.00 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
-
-
-
-
-
-
STI 19.45 mm Dia. 130 Bright Carbide 5-8XD Non-Coolant Thru Drill
19.45 MM DIA 3 FLUTE NON COOLANT BRIGHT
-
-
YG-1 2.3 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
2.30MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
HAM 19.05 mm Dia. 140 TA-CN Non-Coolant Thru Drill
3/4″ 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
YG-1 3.1 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
3.10MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
-
-
-
-
-
-
-
-
-
-
HAM 3.97 mm Dia. 140 TA-C Non-Coolant Thru Drill
5/32″ 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
-
-
HAM 2.9 mm Dia. 130 Bright Non-Coolant Thru Drill
2.90 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
Tungaloy 12 mm Dia. TiAlN 3XD Non-Coolant Thru Drill
12 mm GigaPowerDrill series without coolant hole, L/D=3, dia=3.0 – 16.0mm
-
-
HAM 4.2 mm Dia. kevlar Bright Non-Coolant Thru Drill
4.20 mm Solid Carbide Twist Drill, 2 Flutes, Special Point Grind, Bright, Non-Coolant
-
