General Drills
Showing 1301–1350 of 11904 results
-
YG-1 0.1875 Dia. 140 Carbide TiAlN 3XD Coolant Thru Drill
3/16 CARBIDE DREAM DRILL W/ COOLANT HOLES (3XD)
-
-
-
HAM 1.2 mm Dia. 120 Bright Non-Coolant Thru Drill
1.20 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
-
HAM 1.4 mm Dia. 120 Bright Non-Coolant Thru Drill
1.40 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
HAM 0.95 mm Dia. 130 Bright Non-Coolant Thru Drill
0.95 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
-
-
YG-1 0.1562 Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
5/32 DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
-
-
-
-
-
YG-1 4.4 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
4.40MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
-
-
-
-
-
-
-
-
HAM 8 mm Dia. kevlar Bright Non-Coolant Thru Drill
8.00 mm Solid Carbide Twist Drill, 2 Flutes, Special Point Grind, Bright, Non-Coolant
-
-
-
-
-
-
-
-
YG-1 0.3906 Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
25/64 CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
-
-
-
-
-
-
-
-
Tungaloy 4.4 mm Dia. TiAlN 3XD Non-Coolant Thru Drill
4.4 mm GigaPowerDrill series without coolant hole, L/D=3, dia=3.0 – 16.0mm
-
-
-
HAM 7.54 mm Dia. 140 TA-C Non-Coolant Thru Drill
19/64″ 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
HAM 1.8 mm Dia. 130 Bright Non-Coolant Thru Drill
1.80 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
HAM 7.54 mm Dia. 140 TA-C Non-Coolant Thru Drill
19/64″ 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-