General Drills
Showing 8351–8400 of 11904 results
-
-
-
YG-1 8.4 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
8.40MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
-
-
-
HAM 11.2 mm Dia. 140 TA-CN Non-Coolant Thru Drill
11.20 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
Tungaloy 7 mm Dia. TiAlN 3XD Non-Coolant Thru Drill
7 mm GigaPowerDrill series without coolant hole, L/D=3, dia=3.0 – 16.0mm
-
-
-
-
-
-
-
-
-
-
HAM 3.4 mm Dia. 120 Bright Non-Coolant Thru Drill
3.40 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
-
-
HAM 11.5 mm Dia. kevlar Bright Non-Coolant Thru Drill
11.50 mm Solid Carbide Twist Drill, 2 Flutes, Special Point Grind, Bright, Non-Coolant
-
-
-
-
-
-
-
-
-
-
Tungaloy 7.5 mm Dia. TiAlN 3XD Non-Coolant Thru Drill
7.5 mm GigaPowerDrill series without coolant hole, L/D=3, dia=3.0 – 16.0mm
-
-
HAM 4.57 mm Dia. 140 TA-CN Non-Coolant Thru Drill
4.57 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
-
-
-
-
YG-1 2.8 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
2.80MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
-
HAM 15 mm Dia. 140 TA-C Non-Coolant Thru Drill
15.00 mm 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
YG-1 1.9 mm Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
1.90MM CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
YG-1 0.1562 Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
5/32 DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
HAM 8.4 mm Dia. 120 Bright Non-Coolant Thru Drill
8.40 mm Solid Carbide Twist Drill, 2 Flute, Bright, Non-Coolant
-
-
-
-
-
-
-