General Drills
Showing 7601–7650 of 11904 results
-
-
-
-
-
-
-
-
HAM 5.8 mm Dia. 120 TA Non-Coolant Thru Drill
5.80 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
HAM 10.5 mm Dia. 140 TA-CN Non-Coolant Thru Drill
10.50 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
-
YG-1 7.9 mm Dia. 140 Carbide TiAlN 3XD Non-Coolant Thru Drill
7.90MM CARBIDE DREAM DRILL W/O COOLANT HOLES (3XD)
-
YG-1 0.1719 Dia. 140 Carbide TiAlN 6XD Non-Coolant Thru Drill
11/64 CARBIDE DREAM DRILL FOR HIGH HARDENED MATERIAL (HRc50 ~ HRc70) TIALN COATED
-
HAM 16.5 mm Dia. 140 TA-CN Non-Coolant Thru Drill
16.50 mm 3XD Solid Carbide Niro Drill, 2 Flutes, TA-CN Coated, Non-Coolant
-
-
YG-1 19.5 mm Dia. 180 Flat Bottom Carbide TiAlN 2XD Non-Coolant Thru Drill
19.50MM DREAM DRILL FLAT BOTTOM DRILL W/O COOLANT HOLE (2XD)
-
-
-
-
-
-
-
HAM 0.75 mm Dia. 130 Bright Non-Coolant Thru Drill
0.75 mm Solid Carbide Twist Drill, 2 Flutes, AMS Geometry, Bright, Non-Coolant
-
HAM 10.32 mm Dia. 140 TA-C Non-Coolant Thru Drill
13/32″ 5XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
-
HAM 17.46 mm Dia. 140 TA-C Non-Coolant Thru Drill
11/16″ 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
-
-
-
-
-
-
Tungaloy 9 mm Dia. TiAlN 2XD Non-Coolant Thru Drill
9 mm GigaPowerDrill series without coolant hole, L/D=2, dia=3.0 – 16.0mm
-
-
-
-
-
-
YG-1 0.5156 Dia. 140 Carbide TiAlN 3XD Non-Coolant Thru Drill
33/64 CARBIDE DREAM DRILL W/O COOLANT HOLES (3XD)
-
YG-1 7.37 mm Dia. 118 Carbide TiAlN Jobber Non-Coolant Thru Drill
7.37MM CARBIDE JOBBER LENGTH TWIST DRILL TIALN COATED
-
-
HAM 8.2 mm Dia. 120 TA Non-Coolant Thru Drill
8.20 mm Solid Carbide Twist Drill, 2 Flute, TA Coated, Non-Coolant
-
HAM 10.5 mm Dia. 140 TA-C Non-Coolant Thru Drill
10.50 mm 3XD Solid Carbide Super Drill, 2 Flutes, TA-C Coated, Non-Coolant
-
-
-
-
Tungaloy 4.4 mm Dia. TiAlN 3XD Non-Coolant Thru Drill
4.4 mm GigaPowerDrill series without coolant hole, L/D=3, dia=3.0 – 16.0mm
-
-