YG-1 0.1718 in or 4.3637 mm Square Hss Uncoated 4 Flute End Mill

Size: 11/64 x 0.375 x 0.5 x 3.25

Description

General

The Yg-1 Genral Purpose is a Standard length UNCOATED coated square Hss Finisher. It has a double end, and a weldon flat shank. This mill is capable of cutting Steel 20 – 40 HRc,IRON,STAINLESS For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

When to use HSS

High Speed Steel is the toughest of all cutting tool substrates. It works well in matirials under 35HRc as it has a hardness fo 62HRC. It is great for manual machines, low rididity aplications, extremely tough matirials and low SFM machining.

Industries used in

Job Shop

Shipping

Ships From: ILLINOIS

Additional information

Flutes

4

Single/Double End

Double End

Brand

YG-1

Model

Genral Purpose

Material Cut Rating

IRON, STAINLESS, Steel 20 – 40 HRc

Ships From

ILLINOIS

Cutting Diameter (DC)

0.1718 in || 4.3637 mm

Shank Diameter

0.1718 in || 4.3637 mm

Length of Cut (LB)

0.5000 in || 12.7000 mm

Overall Length (LF)

3.2500 in || 82.5500 mm

End/Corner Shape

SQUARE

Shank Style

WELDON FLAT

Corner Radius

Sharp

Tool Length

STANDARD

Material

HSS

Cutter Style

Finisher

Helix Angle

30

INCH/METRIC

INCH

Industry

JOB SHOP

Center Cutting?

Yes

Coating

Uncoated

Reviews

There are no reviews yet.

Be the first to review “YG-1 0.1718 in or 4.3637 mm Square Hss Uncoated 4 Flute End Mill”