YG-1 0.0591 in or 1.5000 mm Corner Radius Carbide Tialn 4 Flute End Mill

Size: 1.50MM x 4.000MM x 2.300MM x 50.00MM

SKU: SEME640150512 Categories: , , ,

Description

General

The Yg-1 4G Mill is a Standard/ With Neck length TiALN coated corner radius Carbide Bull Nose Finisher . It has a single end, and a round shank. This mill is capable of cutting Steel 51+ HRc,CAST IRON For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use TiAlN

TiAlN is the most common coating used for machining Steel, Stainless, High Temp and Iron. This coating is good for high speed machining and is very stable in all cutting conditions. TiAlN takes rubbing better than some of its newer upgrades. This coating shows the most evident oxidization or black line behind cutting edge. This black area is a great indicator of proper use, the larger the black line the better your life will be. First choice coating for most machining.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

When to use Variable Helix

Variable Helix is becoming the standard for all milling tools. It is used to dampen vibration as the flutes enter and exit the material. Depending on the type of variables these tools work great for long reach, slotting, and roughing. Down fall is variable tools like high helix tools can pull out of shrink fit, collets and milling chucks. Weldon flat when roughing is preferred and most failures are chipping from pulling out of work holding

Industries used in

Job Shop,Mold/Die,Automotive,Aerospace

Shipping

Ships From: ILLINOIS

Additional information

Flutes

4

Single/Double End

Single End

Brand

YG-1

Model

4G Mill

Material Cut Rating

CAST IRON, Steel 51+ HRc

Ships From

ILLINOIS

Cutting Diameter (DC)

0.0591 in || 1.5000 mm

Shank Diameter

0.0023 in || 0.0590 mm

Length of Cut (LB)

0.0906 in || 2.3000 mm

Overall Length (LF)

1.9685 in || 50.0000 mm

End/Corner Shape

Corner Radius

Shank Style

Round

Corner Radius

0.0197 in || 0.5004 mm

Tool Length

STANDARD/ WITH NECK

Length of Relief

0.4724 in || 12.0000 mm

Material

Carbide

Cutter Style

Bull Nose Finisher

Helix Angle

VARIABLE

INCH/METRIC

METRIC

Industry

AEROSPACE, AUTOMOTIVE, JOB SHOP, MOLD/DIE

Center Cutting?

Yes

Coating

TiAlN

Reviews

There are no reviews yet.

Be the first to review “YG-1 0.0591 in or 1.5000 mm Corner Radius Carbide Tialn 4 Flute End Mill”