Widin 0.0984 in or 2.5000 mm Square Carbide Altin 4 Flute End Mill

Size: 2.5 X 12 X 6 X 50

SKU: WXE50402512 Categories: , , ,

Description

General

The Widin Winner is a Standard length AlTIN coated square Carbide Finisher. It has a single end, and a round shank. This mill is capable of cutting Steel 20 – 40 HRc,CAST IRON,STAINLESS For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use AlTIN

AlTIN is applicable to HSS and carbide tooling. AlTIN has shown great results in machining a wide variety material from General Steel, Iron, Stainless, High Temp and Hardened Steel with and without coolant. AlTIN is a great choice for general machining at elevated surface foot. The flank of the cutting edge should form a dark black line. The thicker the line the closer you are to achieving proper cutting parameters. This line is the oxidization process being finished as heat is generated. To thin a line or no black line means you are not generating enough heat that could cause coating to rub off.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

When to use Variable Helix

Variable Helix is becoming the standard for all milling tools. It is used to dampen vibration as the flutes enter and exit the material. Depending on the type of variables these tools work great for long reach, slotting, and roughing. Down fall is variable tools like high helix tools can pull out of shrink fit, collets and milling chucks. Weldon flat when roughing is preferred and most failures are chipping from pulling out of work holding

Industries used in

Job Shop

Shipping

Ships From: ILLINOIS

Additional information

Flutes

4

Single/Double End

Single End

Brand

Widin

Model

WINNER

Material Cut Rating

CAST IRON, STAINLESS, Steel 20 – 40 HRc

Ships From

ILLINOIS

Cutting Diameter (DC)

0.0984 in || 2.5000 mm

Shank Diameter

0.0039 in || 0.0984 mm

Length of Cut (LB)

0.4724 in || 12.0000 mm

Overall Length (LF)

1.9685 in || 50.0000 mm

End/Corner Shape

SQUARE

Shank Style

Round

Corner Radius

Sharp

Tool Length

STANDARD

Material

Carbide

Cutter Style

Finisher

Helix Angle

VARIABLE

INCH/METRIC

METRIC

Industry

JOB SHOP

Center Cutting?

Yes

Coating

AlTiN

Reviews

There are no reviews yet.

Be the first to review “Widin 0.0984 in or 2.5000 mm Square Carbide Altin 4 Flute End Mill”