Mastercut 0.2500 in or 6.3500 mm Corner Radius Carbide Nacroa 6 Flute End Mill

Size: 1/4 x 1/4 x 1/4 x 6

Description

General

The Mastercut Mold Mills is a Long/With Neck length nACRoA coated corner radius Carbide Finisher. It has a single end, and a round shank. This mill is capable of cutting Steel 41 – 50 HRc,INCONEL,STAINLESS,HIGHTEMP For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use nACRoA

nACRoA is applicable to HSS and carbide tooling and for forming and forging operations. nACRoA has shown great results in machining a wide variety of hardened steels up to 54 HRC both with and without coolant as well as low alloy steels and high tensile steels. nACRoA has best success at high cutting speeds. If you cant achieve high cutting speeds the coat will wear off quickly and you should revert to TiCN or TiN. I would use nACRoA as the first choice in High Temp Alloy, soft steel that can be run at very high surface foot, Stainless and hardened steel. At proper use or heat you will see a thin black line that is the oxidation process, the darker the line the closer you are to ideal use.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

When to use Variable Helix

Variable Helix is becoming the standard for all milling tools. It is used to dampen vibration as the flutes enter and exit the material. Depending on the type of variables these tools work great for long reach, slotting, and roughing. Down fall is variable tools like high helix tools can pull out of shrink fit, collets and milling chucks. Weldon flat when roughing is preferred and most failures are chipping from pulling out of work holding

Industries used in

Job Shop,Mold/Die

Shipping

Ships From: FLORIDA

Additional information

Flutes

6

Single/Double End

Single End

USA Made

Yes

Brand

Mastercut

Model

MOLD MILLS

Material Cut Rating

HIGHTEMP, INCONEL, STAINLESS, Steel 41 – 50 HRc

Ships From

FLORIDA

Cutting Diameter (DC)

0.2500 in || 6.3500 mm

Shank Diameter

0.2500 in || 6.3500 mm

Length of Cut (LB)

0.2500 in || 6.3500 mm

Overall Length (LF)

6.0000 in || 152.4000 mm

End/Corner Shape

Corner Radius

Shank Style

Round

Corner Radius

0.0200 in || 0.5080 mm

Tool Length

LONG/WITH NECK

Length of Relief

2.0000 in || 50.8000 mm

Material

Carbide

Cutter Style

Finisher

Helix Angle

VARIABLE

INCH/METRIC

INCH

Industry

JOB SHOP, MOLD/DIE

Center Cutting?

Yes

Coating

nACRoA

Reviews

There are no reviews yet.

Be the first to review “Mastercut 0.2500 in or 6.3500 mm Corner Radius Carbide Nacroa 6 Flute End Mill”