Ma Ford 0.0591 in or 1.5000 mm Corner Radius Carbide Altin 3 Flute End Mill

Description

General

The Ma Ford Tuffcut 3Mv is a Standard length AlTIN coated corner radius Carbide Bull Nose Finisher . It has a single end, and a round shank. This mill is capable of cutting Steel 51+ HRc,CAST,STAINLESS,TITANIUM,HIGH TEMP For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use AlTIN

AlTIN is applicable to HSS and carbide tooling. AlTIN has shown great results in machining a wide variety material from General Steel, Iron, Stainless, High Temp and Hardened Steel with and without coolant. AlTIN is a great choice for general machining at elevated surface foot. The flank of the cutting edge should form a dark black line. The thicker the line the closer you are to achieving proper cutting parameters. This line is the oxidization process being finished as heat is generated. To thin a line or no black line means you are not generating enough heat that could cause coating to rub off.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

When to use Variable Helix

Variable Helix is becoming the standard for all milling tools. It is used to dampen vibration as the flutes enter and exit the material. Depending on the type of variables these tools work great for long reach, slotting, and roughing. Down fall is variable tools like high helix tools can pull out of shrink fit, collets and milling chucks. Weldon flat when roughing is preferred and most failures are chipping from pulling out of work holding

Industries used in

Job Shop

Shipping

Ships From: IOWA