Hanita/Widia 1.0000 in or 25.4000 mm 45 Deg Cham Powder Metal Tialn 5 Flute End Mill

Size: 1.000 x 2.0000 x 4.000MM x 6.5

Description

General

The Hanita/Widia Widia Series Mills is a Standard length TiAlN coated 45 deg cham Powder Metal Fine Rougher. It has a single end, and a weldon flat shank. This mill is capable of cutting Steel 20 – 40 HRc,CAST IRON For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use TiAlN

TiAlN is the most common coating used for machining Steel, Stainless, High Temp and Iron. This coating is good for high speed machining and is very stable in all cutting conditions. TiAlN takes rubbing better than some of its newer upgrades. This coating shows the most evident oxidization or black line behind cutting edge. This black area is a great indicator of proper use, the larger the black line the better your life will be. First choice coating for most machining.

Advatages to Powder Metal

Powder Metal falls between Carbiden and Cobalt on the hardness scale. Particals can can be up to 78HRc but average hardness is 73HRc. Powder metal come in many different blends and is used when carbide is fracturing and Cobalt is wearing from heat. This is a great alternative to carbide as it can be ground to very sharp edge do to its small partical density. It can take high load cutting at close to carbide surface footage. It excells in high temp alloy machining as with its ability to have sharp edge and toughness in high tensile strengh aplications. It is used many times in aplications wear machine tool cant acheive recomended surface footage for carbide.

Industries used in

Job Shop

Shipping

Ships From: OHIO

Additional information

Flutes

5

Single/Double End

Single End

USA Made

Yes

Brand

HANITA/WIDIA

Model

WIDIA Series Mills

Material Cut Rating

CAST IRON, Steel 20 – 40 HRc

Ships From

OHIO

Cutting Diameter (DC)

1.0000 in || 25.4000 mm

Shank Diameter

1.0000 in || 25.4000 mm

Length of Cut (LB)

0.1575 in || 4.0000 mm

Overall Length (LF)

6.5000 in || 165.1000 mm

End/Corner Shape

45 DEG CHAM

Shank Style

WELDON FLAT

Tool Length

STANDARD

Length of Relief

4.0000 in || 101.6000 mm

Material

POWDER METAL

Cutter Style

Fine Rougher

Helix Angle

35

INCH/METRIC

INCH

Industry

JOB SHOP

Center Cutting?

Yes

Coating

TiAlN

Reviews

There are no reviews yet.

Be the first to review “Hanita/Widia 1.0000 in or 25.4000 mm 45 Deg Cham Powder Metal Tialn 5 Flute End Mill”