Gorilla 0.3750 in or 9.5250 mm 45 Deg Cham Carbide Tialn 4 Flute End Mill

Size: 3/8 x 0.375 x 0.5625 x 2.000

SKU: 50079 Categories: , ,

Description

General

The Gorilla Knuckle Dragger is a Stub length TiALN coated 45 deg cham Carbide Fine Pitch Rougher. It has a single end, and a weldon flat shank. This mill is capable of cutting LOW CARBON STEEL,STAINLESS,INCONEL,TITANIUM,HIGH TEMP For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use TiAlN

TiAlN is the most common coating used for machining Steel, Stainless, High Temp and Iron. This coating is good for high speed machining and is very stable in all cutting conditions. TiAlN takes rubbing better than some of its newer upgrades. This coating shows the most evident oxidization or black line behind cutting edge. This black area is a great indicator of proper use, the larger the black line the better your life will be. First choice coating for most machining.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

When to use Variable Helix

Variable Helix is becoming the standard for all milling tools. It is used to dampen vibration as the flutes enter and exit the material. Depending on the type of variables these tools work great for long reach, slotting, and roughing. Down fall is variable tools like high helix tools can pull out of shrink fit, collets and milling chucks. Weldon flat when roughing is preferred and most failures are chipping from pulling out of work holding

Industries used in

Job Shop,Energy Mfg,Automotive,Agriculture

Shipping

Ships From: WISCONSIN

Additional information

Flutes

4

Single/Double End

Single End

USA Made

Yes

Brand

Gorilla

Model

KNUCKLE DRAGGER

Material Cut Rating

HIGH TEMP, INCONEL, LOW CARBON STEEL, STAINLESS, TITANIUM

Ships From

WISCONSIN

Cutting Diameter (DC)

0.3750 in || 9.5250 mm

Shank Diameter

0.3750 in || 9.5250 mm

Length of Cut (LB)

0.5625 in || 14.2875 mm

Overall Length (LF)

2.0000 in || 50.8000 mm

End/Corner Shape

45 DEG CHAM

Shank Style

WELDON FLAT

Tool Length

STUB

Material

Carbide

Cutter Style

FINE PITCH ROUGHER

Helix Angle

VARIABLE

INCH/METRIC

INCH

Industry

AGRICULTURE, AUTOMOTIVE, ENERGY MFG, JOB SHOP

Center Cutting?

Yes

Coating

TiAlN

Reviews

There are no reviews yet.

Be the first to review “Gorilla 0.3750 in or 9.5250 mm 45 Deg Cham Carbide Tialn 4 Flute End Mill”