Description
General
The Emuge Top-Cut is a Stub length TIALN coated square Carbide Finisher. It has a single end, and a round shank. This mill is capable of cutting Steel 20 – 40 HRc,STAINLESS,INCONEL,TITANIUM,HIGH TEMP For further size a specification data, please view the Additional Information Tab
Features and Benefits
Why use TiAlN
TiAlN is the most common coating used for machining Steel, Stainless, High Temp and Iron. This coating is good for high speed machining and is very stable in all cutting conditions. TiAlN takes rubbing better than some of its newer upgrades. This coating shows the most evident oxidization or black line behind cutting edge. This black area is a great indicator of proper use, the larger the black line the better your life will be. First choice coating for most machining.
Benefits of Carbide
Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.
When to use Variable Helix
Variable Helix is becoming the standard for all milling tools. It is used to dampen vibration as the flutes enter and exit the material. Depending on the type of variables these tools work great for long reach, slotting, and roughing. Down fall is variable tools like high helix tools can pull out of shrink fit, collets and milling chucks. Weldon flat when roughing is preferred and most failures are chipping from pulling out of work holding
Industries used in
Job Shop
Shipping
Ships From: MASSACHUSETTS
Reviews
There are no reviews yet.