Gorilla Mill 0.1875 in or 4.7625 mm Square Carbide Zrn 3 Flute End Mill

Description

General

The Gorilla Silverback is a Standard length ZrN coated square Carbide Finisher. It has a single end, and a round shank. This mill is capable of cutting ALUMINUM,PLASTIC For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use ZrN

ZrN has the best lubricity of all the coatings available today. Its should be your first choice for high production Aluminum cutting. It has also performed very well in some High Temp alloys at lower surface footages.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

When to use Variable Helix

Variable Helix is becoming the standard for all milling tools. It is used to dampen vibration as the flutes enter and exit the material. Depending on the type of variables these tools work great for long reach, slotting, and roughing. Down fall is variable tools like high helix tools can pull out of shrink fit, collets and milling chucks. Weldon flat when roughing is preferred and most failures are chipping from pulling out of work holding

Industries used in

Job Shop

Shipping

Ships From: WISCONSIN