IMCO 0.4724 in or 12.0000 mm Corner Radius Carbide Uncoated 3 Flute End Mill

Size: 12 x 12 x 26 x 83 ZrN

Description

General

The Imco Streaker Mill is a Standard length UNCOATED coated corner radius Carbide Bull Nose Finisher . It has a single end, and a round shank. This mill is capable of cutting ALUMINUM,PLASTIC For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

Industries used in

Job Shop,Aerospace,Medical

Shipping

Ships From: OHIO

Additional information

Flutes

3

Single/Double End

Single End

USA Made

Yes

Brand

IMCO

Model

Streaker Mill

Material Cut Rating

ALUMINUM, PLASTIC

Ships From

OHIO

Cutting Diameter (DC)

0.4724 in || 12.0000 mm

Shank Diameter

0.0186 in || 0.4724 mm

Length of Cut (LB)

1.0236 in || 26.0000 mm

Overall Length (LF)

3.2677 in || 83.0000 mm

End/Corner Shape

Corner Radius

Shank Style

Round

Corner Radius

0.0118 in || 0.2997 mm

Tool Length

STANDARD

Material

Carbide

Cutter Style

Bull Nose Finisher

Helix Angle

45

INCH/METRIC

METRIC

Industry

AEROSPACE, JOB SHOP, MEDICAL

Center Cutting?

Yes

Coating

Uncoated

Reviews

There are no reviews yet.

Be the first to review “IMCO 0.4724 in or 12.0000 mm Corner Radius Carbide Uncoated 3 Flute End Mill”