Hanita/Widia 0.2362 in or 6.0000 mm Ball Nose Carbide Uncoated 4 Flute End Mill

Size: 6.00MM x 10.000MM x 6.000MM x 100.00MM

SKU: 1724326 Categories: , , ,

Description

General

The Hanita/Widia Vision Plus is a Standard length Uncoated coated ball nose Carbide Ball Finisher. It has a single end, and a round shank. This mill is capable of cutting Steel 51+ HRc For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

Industries used in

Job Shop,Mold/Die

Shipping

Ships From: OHIO

Additional information

Flutes

4

Single/Double End

Single End

USA Made

Yes

Brand

HANITA/WIDIA

Model

Vision Plus

Material Cut Rating

Steel 51+ HRc

Ships From

OHIO

Cutting Diameter (DC)

0.2362 in || 6.0000 mm

Shank Diameter

0.0093 in || 0.2362 mm

Length of Cut (LB)

0.2362 in || 6.0000 mm

Overall Length (LF)

3.9370 in || 100.0000 mm

End/Corner Shape

Ball Nose

Shank Style

Round

Corner Radius

BALL 180

Tool Length

STANDARD

Length of Relief

0.2362 in || 6.0000 mm

Material

Carbide

Cutter Style

Ball Finisher

Helix Angle

15

INCH/METRIC

METRIC

Industry

JOB SHOP, MOLD/DIE

Center Cutting?

Yes

Coating

Uncoated

Reviews

There are no reviews yet.

Be the first to review “Hanita/Widia 0.2362 in or 6.0000 mm Ball Nose Carbide Uncoated 4 Flute End Mill”