Robbjack 0.0079 in or 0.2000 mm Square Carbide Tin 2 Flute End Mill

Size: 0.2 x 3 x 0.3 x 38

Description

Why use TIN

Tin should be used in low surface foot or low heat cutting. It is a great top coating for many other coatings. It gives the best view of wear, making it an operators first choice if possible. Good for tools that taper were surface footage is low or fricion with limited heat may occur.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

Industries used in

Additional information

Flutes	2
Single/Double End	Single End
USA Made	Yes
Brand	RobbJack
Model	ROBBJACK
Material Cut Rating	20 – 40 HRc, IRON, STAINLESS
Ships From	CALIFORNIA
Shank Diameter	0.0003 in \|\| 0.0079 mm
Length of Cut (LB)	0.0118 in \|\| 0.3000 mm
Overall Length (LF)	1.4961 in \|\| 38.0000 mm
End/Corner Shape	SQUARE
Shank Style	Round
Corner Radius	Sharp
Tool Length	STANDARD
Material	Carbide
Cutter Style	Carbide Finisher
Helix Angle	30
INCH/METRIC	METRIC
Industry	JOB SHOP
Center Cutting?	Yes
Coating	TiN

Reviews

There are no reviews yet.

Be the first to review “Robbjack 0.0079 in or 0.2000 mm Square Carbide Tin 2 Flute End Mill”

You must be logged in to post a review.