Melin 0.5000 in or 12.7000 mm Square Cobalt Ticn 4 Flute End Mill

Size: 1/2 x 1/2 x 7.000MM x 6

Description

General

The Melin Melin is a Standard length TiCN coated square Cobalt Long Finisher. It has a single end, and a weldon flat shank. This mill is capable of cutting Steel 20 – 40 HRc,STAINLESS,CAST IRON,HIGH TEMP For further size a specification data, please view the Additional Information Tab

Features and Benefits

Why use TiCN

TiCN is a great lubricity coating used in machining all kind of materials at lower temperatures. It excels in Brass, Bronze, plastic and Aluminum. It can be used in Steel, iron, Stainless and High Temp alloys at lower surface footage. This coating can be applied HSS, Cobalt, Powder Metal and Carbide. If you are getting built up edge and slowing down your cutter isnt a problem this is the coating to cure that problem.

Advantages to Cobalt

Cobalt is extremly versitile and is used on matirials up to 40HRc as it is 68HRc making it the second toughest substrate. Cobalt can be used on almost all matirials. It should be used when carbide chips or when High Speed wears out quickly. Cobalt performs extremly well on high tensile strength matirials, wear high cutting forces fracture carbide.

Industries used in

Job Shop

Shipping

Ships From: OHIO/CALIFORNIA

Additional information

Flutes

4

Single/Double End

Single End

USA Made

Yes

Brand

Melin

Model

MELIN

Material Cut Rating

CAST IRON, HIGH TEMP, STAINLESS, Steel 20 – 40 HRc

Ships From

OHIO/CALIFORNIA

Cutting Diameter (DC)

0.5000 in || 12.7000 mm

Shank Diameter

0.5000 in || 12.7000 mm

Length of Cut (LB)

0.2756 in || 7.0000 mm

Overall Length (LF)

6.0000 in || 152.4000 mm

End/Corner Shape

SQUARE

Shank Style

WELDON FLAT

Corner Radius

Sharp

Tool Length

STANDARD

Length of Relief

4.0000 in || 101.6000 mm

Material

Cobalt

Cutter Style

LONG FINISHER

Helix Angle

30

INCH/METRIC

INCH

Industry

JOB SHOP

Center Cutting?

Yes

Coating

TiCN

Reviews

There are no reviews yet.

Be the first to review “Melin 0.5000 in or 12.7000 mm Square Cobalt Ticn 4 Flute End Mill”