Melin 0.3750 in or 9.5250 mm Corner Radius Carbide Uncoated 2 Flute End Mill

Size: 3/8 x 3/8 x 0.5 x 4

Description

General

The Melin Melin is a Standard length UNCOATED coated corner radius Carbide Finisher. It has a single end, and a round shank. This mill is capable of cutting ALUMINUM For further size a specification data, please view the Additional Information Tab

Features and Benefits

UNCOATED

UNCOATED is as it states no coating. This tool still has many benefits over a coated tool. All coating put heat in the tool causing them to become more brittle. Long reach small diameter tools many times perform better uncoated as they dont snap as easily. Applications were coatings may leave partials in the part. J polished tools coatings tend not to adhere to showing very little benefit in tool life. Micro tooling where surface footage is never going to be achieved. Cost is not much different today but there is still a small up charge for coating.

Benefits of Carbide

Carbide is the most versatile material for cutting all materials. This should be the first choice for rigid cutting. Carbide comes in many different varieties of toughness and hardness. Round tools are limited in varsity as they are extruded. Inserts come in hundreds of combinations as they are sintered and pressed.

Industries used in

Job Shop,Aerospace,Medical

Shipping

Ships From: OHIO/CALIFORNIA

Additional information

Flutes

2

Single/Double End

Single End

USA Made

Yes

Brand

Melin

Model

MELIN

Material Cut Rating

ALUMINUM

Ships From

OHIO/CALIFORNIA

Cutting Diameter (DC)

0.3750 in || 9.5250 mm

Shank Diameter

0.3750 in || 9.5250 mm

Length of Cut (LB)

0.5000 in || 12.7000 mm

Overall Length (LF)

4.0000 in || 101.6000 mm

End/Corner Shape

Corner Radius

Shank Style

Round

Corner Radius

0.0150 in || 0.3810 mm

Tool Length

STANDARD

Material

Carbide

Cutter Style

Finisher

Helix Angle

45

INCH/METRIC

INCH

Industry

AEROSPACE, JOB SHOP, MEDICAL

Center Cutting?

Yes

Coating

Uncoated

Reviews

There are no reviews yet.

Be the first to review “Melin 0.3750 in or 9.5250 mm Corner Radius Carbide Uncoated 2 Flute End Mill”